Order by Phone

0113 246 7985

JBL LSR6328P 5.1 System

• 

 

For those of you who are serious about clarity and precision in a 5.1 format, this pack should be your first thought. JBL brings forth extreme clarity and ease of setup in an affordable package. This system contains (5) JBL LSR 6328P self powered studio monitors, as well as (1) JBL LSR6312SP subwoofer. To make the decision even easier, JBL includes the Room Mode Correction kit with this studio monitor package. Listed below are the attributes of the LSR6328P and the LSR6312SP subwoofer.

JBL LSR6328P

The LSR6328P studio monitor is designed for use in critical stereo and multi-channel monitoring applications that require exceptional spectral accuracy and high SPL capability. The LSR6328P combines the latest in JBL's renowned transducer and system technology with psychoacoustically derived spatial response criteria, resulting in a more accurate studio monitoring reference system. In this design process, the system's frequency response over the forward listening range (+/-15 degree vertically and +/-30 degree horizontally) is optimized, as opposed to the conventional approach of optimizing the response directly onaxis. This design approach involved careful component design, selection of crossover frequency, and precise baffle geometry and detail. The result is a system that can be used for the most critical judgments of recording balance, image placement, and equalization. The matching of the LSR6328P system to the listening environment is further enhanced through the use of RMC, an analysis/correction system that identifies and corrects response to compensate for the dominant low frequency standing wave in the system's room response. In addition to a rich array of performance features, the JBL LSR6328P has a reinforced enclosure and integral mounting points to facilitate wall mounting. Recessed handles facilitate easy positioning of the loudspeaker in the environment and aid in transportability.

JBL LSR6312SP Subwoofer

The JBL LSR6312SP powered studio subwoofer is designed to provide low frequency extension and sophisticated bass management capabilities in stereo and multi-channel applications where exceptional spectral accuracy and high-SPL are required. The LSR6312SP powered studio subwoofer is designed to provide low frequency extension and sophisticated bass management capabilities in stereo and multi-channel applications where exceptional spectral accuracy and high-SPL are required. The system includes JBL's RMC(TM) Room Mode Correction circuit. The system is designed around JBL's 252F LF transducer, which uses dual voice coils and a powerful neodymium magnet. With the patented Differential Drive(TM) technology, power compression is kept to a minimum. An additional third coil located between the two drive coils acts as a dynamic brake to limit excess excursion and reduce audible distortion at the highest operating levels. The cone is made of a carbon fiber polypropylene composite forming a rigid piston area supported by a soft butyl rubber surround. 

Features

• Advanced Linear Spatial Reference design ensures flatter-off-axis response
  for greater clarity at the mix position
• RMC(TM) Room Mode Correction provides electronic control of room
  modes. User measurement and calibration kit available
• Differential Drive(TM) technology with dynamic braking for extended low
  frequency response and minimal power compression
• Integrated bi-amplification with factory calibrated sensitivities
• Titanium composite high frequency transducer with elliptical oblate
  spheroidal waveguide for precise pattern control
• Magnetically shielded high frequency transducer minimizes interference
  when used in close proximity to video monitors
• High-Density baffle for high inertial ground and low resonance
• Linear Dynamics Aperture port design eliminates port turbulence
  and reduces port compression
• Reinforced enclosure and convenient mounting points for mounted
  installation
• Integral handles facilitate ease of positioning
• Multi-format powered subwoofer for Dolby Prologic, AC-3, DTS and other surround formats
• RMC(TM) Room Mode Correction provides electronic control of response peaks due to room modes
• RMC calibration kit included
• 260 watt continuous output power amplifier
• Sophisticated LCR bass management system
• Direct LFE input with selectable +10 dB input gain
• Summed output allows chaining of multiple LSR6312SP for multiple subwoofer systems
• Differential Drive(TM) technology with dynamic braking for extended low
  frequency response and low power compression
• High density baffle for low resonance and stable inertial ground
• Linear Dynamics Aperture port design minimizes port turbulence and reduces power compression
• Reinforced enclosure with standardized mounting points allow mounted installation

User Reviews

This product has no user reviews at the moment. Log in to add your own reviews.