Order by Phone

0113 246 7985

MOTU Traveler

• 
• 
• 

 

The Traveler is everything you need to turn your computer into a mobile 24-bit, 192kHz digital audio workstation. Powered by your computer's FireWire bus, the Traveler gives you a complete, battery-operated studio wherever your recording projects take you.

The Traveler provides eight channels of pristine 192kHz analog recording and playback, combined with all of the digital I/O you need: ADAT optical, AES/EBU and S/PDIF (both TOSLink and RCA). Expand your system by connecting additional Traveler, 828 or 896 FireWire audio interfaces.

Precision Trim and on-board mixing

The Traveler's four microphone/instrument pre-amps are equipped with individual 48V phantom power switches and digital Precision Trim controls, conveniently adjusted from the front panel or the included CueMix Console? software. No mixer is required, thanks to CueMix DSP, the Traveler's latency-free, 8-bus digital mixer. Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the Traveler's main outs, headphone jack and/or any other output with no latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs, headphones and other outputs. Control everything from the CueMix Console software or directly from the Traveler's front-panel. Bus power and extended battery operation

Time to hit the road. The Traveler slides easily into your backpack or briefcase and fits neatly beneath your laptop. Record in the most remote locations with the complete freedom of battery power. You can even use the Traveler as a stand-alone mixer. Tweak your mix on the spot with the Traveler's backlit LCD and front-panel controls.

Ideal for studio and stage

Back in the studio, mount the Traveler in your rack with the included rack ears. Eight channels of ADAT optical I/O make the Traveler an ideal companion for a digital console. The ADAT lightpipe connection supports sample rates up to 96kHz.

Features

• Sturdy lightweight construction ready to travel with you anywhere.
• Compact size (14.75 x 9 inches).
• Powered by computer* or battery no additional power supply necessary for complete recording freedom.
• 20 channels with 4 mic inputs all the I/O you need.
• Individual 48V phantom power?mix and match microphones.
• Digital Precision Trim adjust preamp gain in 1dB increments; save and recall multiple trim setups.
• Record at sample rates up to 192kHz.
• CueMix DSP provides latency-free monitoring system.
• Front-panel control access your entire mix, or any Traveler setting, directly from the front panel.
• Stand-alone operation program your mixes at the studio and then bring the Traveler to your gig.
• Multiple CueMix DSP mixes create different monitor mixes for the main outs and headphones.
• Four mic pre-amps with switchable 48-volt phantom power, front-panel Digital Precision Trim.
• 20 inputs / 22 outputs there's no channel sharing in the Traveler; the mic inputs, S/PDIF I/O, AES/EBU I/O.
• 8 channels of 24-bit ADAT optical input/output. Eight channels at 44.1/48kHz. Four channels at 88.2/96kHz.
• Sample-accurate digital transfers between ADAT digital tape decks and the computer via the ADAT sync port.
• Sample-accurate MIDI connect a MIDI controller and/or sound module with no separate interface needed.
• Expandable add additional 828, 828mkII, 896 or Traveler FireWire interfaces for additional I/O.
• Eight 24-bit 192kHz outputs on balanced/unbalanced 1/4" TRS jacks
• Four 24-bit 192kHz inputs on balanced/unbalanced 1/4" TRS jacks
• Separate headphone jack, with independent volume control.
• Stereo 24-bit 96kHz S/PDIF in/out
• Word clock in and out
• Sample-accurate ADAT sync
• Built-in SMPTE time code sync
• Includes drivers for Mac & PC, including ASIO, WDM, Wave, GSIF, Core Audio, and Core MIDI.
• 100% compatible with all host-based effects processing in today's popular audio programs.
• Includes AudioDesk full-featured sample-accurate workstation software for the Macintosh.
• Two FireWire ports for daisy-chaining without a hub
• Front panel meters for all analog, digital and MIDI I/O, plus SMPTE sync tach and lock LEDs.
• Dedicated front panel clock status LEDs.

Bus power requires a non-adapted 6-pin FireWire port

User Reviews

This product has no user reviews at the moment. Log in to add your own reviews.