Order by Phone

0113 246 7985

Quested S7R (single)

• 

 

The starting point for Quested's full-range monitoring.

Two class A-B amplifiers capable of delivering a total of 190 Watts RMS are mated to an enclosure tuned with a double flared port designed to minimise any possible low frequency 'chuffing'. The result is an extremely powerful, neutral, articulate and accurate compact monitor perfect for a wide range of music styles from acoustic jazz to house.

The frequency response is more than adequate for most applications, it can however be extended down to 25Hz when coupled to the SB10R sub-woofer. The S7R is fully magnetically shielded, so can be used in close proximity to CRT monitors.

All S-Series monitors are phase coherent with each other enabling them to be used in combination in 5.1 multi-channel systems
Some typical applications include components in multi-channel systems, post-production, project studios, location recording, and mastering.

Features:

• Size (WxHxD) 244(w) x 347(h) x 308(d) mm
• Weight 11.7 kgs
• Drivers Bass cone - 1 x 165 mm (6 1/2 ")
• High Frequency soft dome - 1 x 28 mm (1 ")
• Maximum SPL 107dB (c) continuous pink noise @ 1 m (119º dB (c) per pair RMS music)
• Frequency Response 65 Hz-20 kHz ± 2 dB
• Connector XLR and 1/4 inch Jack combo socket
• Impedance 10k electronically balanced with RF filters
Wiring Pin 1 ground Sleeve, Pin 2 hot Tip, Pin 3 cold Ring
• Sensitivity -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear
• Subsonic Filter -3 dB @ 30 Hz, 24 dB/oct
• Ultrasonic -3 dB @ 75kHz, 4 dB/oct
• Crossover 1k19
• LF EQ -2/-4 @ 65 Hz
• HF EQ +/- 2 dB @ 10 kHz
• LF output power > 120W RMS
• HF output power > 70W RMS
• T.H.D. < 0.03% at levels up to 1 dB below clip, 20 Hz-20 kHz. typ 0.005% @ 1kHz
• Hum + Noise > -100 dB referred to clip
• Power on Front mounted green LED indicates power applied
• Clip Red LED 2 dB before amplifier clip

User Reviews

This product has no user reviews at the moment. Log in to add your own reviews.